Heated sample tube
Application
Application in extractive sampling systems for cold spots and condensation of the sample to avoid.
Condensation with dust quickly leads to blockage of the gassonde and incorrect displays. This is also by using this approach avoid probe.
An extra filter can be mounted to the probe approach, recommended by dust loads greater than 10 g / m³.
Description
This approach comes in 3 standard probe lengths: 0.5, 1 and 1.5 meters (other lengths on request).
Optional is a 2-way Modbus / RS485 communication protocol that all possible signals of all installed controllers combines Ankersmid.
| Serie type AST |
AST05x |
AST10x |
AST15x |
AST20x |
Temperature Sensor |
TC Fe-CuNi
|
TC Fe-CuNi |
TC Fe-CuNi |
TC Fe-CuNi |
Temperature Controller |
* |
* |
* |
* |
Length Probe |
500mm |
1000mm |
1500mm |
2000mm |
Maximum
Temperature Sampling |
500°C |
500°C |
450°C |
450°C |
Operating
Temperature Up |
200°C |
200°C |
200°C |
200°C |
Sample Gas Input |
G3/4 |
G3/4 |
G3/4 |
G3/4 |
Dust Loading |
Max 2g/m3 |
Max 2g/m3 |
Max2g/m3 |
Max 2g/m3 |
Probe Volume
of the Tube |
200ml/m |
200ml/m |
200ml/m |
200ml/m |
Sample Presure
Max Ambient
|
5 bar g
-20°C to 70°C |
5 bar g
-20°C to 70°C |
5 bar g
-20°C to 70°C |
5 bar g
-20°C to 70°C |
Power Supply
|
230 VAC
500 W
115 VAC
500 W |
230 VAC
800 W
115 VAC
800 W |
2300 VAC
1200 W
115 VAC
1200 W |
2300 VAC
1500 W
115 VAC
1500 W |
| Electrical Standard |
EN
61010 |
EN
60519-1 |
EN
61010 |
EN
60519-1 |
| Degree of Protection |
IP54 |
EN
60529 |
IP54 |
EN
60529 |
Mounting Flange |
DN65 |
PN6 |
|
|
Material of parts
in contact with
the system |
Stainless
Steel 316 |
Stainless
Steel 316 |
|
|
* Temperature controller Microprocessor temperature controller with alarm (optional RS485 or Modbus)
Documentation
Sample Tubes