voor meting in neutrale en zeer corrosieve
gassen. Toepasbaar bij emissiemeting, productie controle en kwaliteit bewaking,
zelfs in gassen met een hoog dauwpunt.
Most frequently used for demanding
applications, the OXYMAT 6 must meet high standards with regard to reliability
and measuring quality. This is guaranteed by modern electronics, ease of
operation and a measuring bench that is adapted to the measuring task.
The OXYMAT 6 measures oxygen using the
paramagnetic alternating pressure method. This guarantees perfect linearity and
allows parameterization of minimal measuring ranges of 0 to 0.5 % (detection
limit 50 ppm) up to 0 to 100% in a single device, and even 99,5 to 100%.
The sensor in the detector does not
come into contact with the sample gas thus allowing the measurement of
corrosive gases. Corrosive resistant materials are used in the gas path.
The gas proof separation of the
electronic and physical section when using the field analyzer design with type
IP65 protection and purging gas connection guarantees a long service life even
under demanding ambient conditions. The field unit is also the basic variant
for the possible optional heating of the analysis unit for the measurement of
low-boiling constituents and for use in hazardous areas.
Ex-uitvoeringen
Met behulp van een optionele purge eenheid is de CALOMAT 6, OXYMAT 6 en
ULTRAMAT 6 in veldbehuizing toepasbaar in explosie gevaarlijke omgevingen. Voor
zowel meting in brandbare en niet brandbare gassen.